Blog

Manufacturing John Concrane

Transformer equipment supplier factory 2024

Dry type transformer supplier factory from China: CANWIN adheres to the business policy of high -end manufacturing, intelligent equipment + intelligent factory, comprehensively improves the quality of products and the cutting speed and precision, accelerates the transformation of development mode, and promotes the upgrading of industrial structure In terms of new product development, the company relies on the “Guangdong university of technology provincial thin plate processing and cutting technology engineering center”as an innovation platform, continuously trains and introduces technological talents, and provides intellectual support for the company to enhance soft power and rapid development. Discover more details at dry type transformer manufacturers.

A China slitting line produces longitudinal cuts in a master coil of steel to predetermined narrower widths. These smaller coils are then sent to downstream operations such as metal stampers, tube producers or roll forming houses that will use the material in their final product. Customized slitting line machine equipment mainly includes the following: Loading trolley, double support uncoiler, feeding device, traction leveling machine, trimming shearing machine, deviation correction feeding device, longitudinal shear line, waste edge winder, feed rack, pre separation device, tensioner, feeding roller, winding shearing machine, steering drum, rear axle, discharge trolley, winding auxiliary support, hydraulic system and electrical system, etc.

The cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). When air cooled naturally, the transformer can run continuously for a long time under rated capacity. When forced air cooling, transformer output capacity can be increased by 50%. Suitable for intermittent overload operation, or emergency overload operation; Because the load loss and impedance voltage increase greatly during overload, it is in non-economic operation state, so it should not be in continuous overload operation for a long time.Welcome to inquiry price for dry type substation transformer.

A transformer core is a static device that provides a channel for magnetic flux to flow in a transformer. The core is constructed using thin strips of silicone steel. The silicon steel sheets are electrically isolated and coupled to reduce no-load losses in the transformer.The core of a transformer is made of soft iron. Transformers are used in various fields like power generation grid, distribution sector, transmission, and electric energy consumption.

The manufacturing technology and product quality of electrical steel plate is one of the important signs to measure the development level of special steel production and science and technology in a country. At present, the quantity, quality and specification of cold rolled electrical steel in China cannot meet the needs of energy (power) industry development, and there is a big gap between China and Japan in terms of production technology, equipment, management and scientific research.Canwin is one of the most professional silicon steel sheet suppliers in China, which has been specialized in silicon steel manufacturing for over 20 years.Contact us, we are the best choice. Read more information at https://www.canwindg.com/

The metal laser cutting machine focuses the laser emitted from the laser into a laser beam with high power density through the optical path system. The laser beam irradiates the surface of the workpiece to make the workpiece reach the melting point or boiling point. At the same time, the high-pressure gas coaxial with the beam blows away the molten or gasified metal. With the movement of the relative position between the beam and the workpiece, the material will finally form a slit, so as to achieve the purpose of cutting. Laser cutting process uses invisible light beam to replace the traditional mechanical knife. It has the characteristics of high precision, fast cutting, not limited to the limitation of cutting pattern, automatic typesetting, material saving, smooth incision and low processing cost. It will gradually improve or replace the traditional metal cutting process equipment.Want to konw more about metal cutting machine, contact us, one of the most professional metal laser cutting machine manufacturers & suppliers in China.

The main pillar of the smart grid is the smart substation, which is not only an important hub for power transmission and distribution, but also directly affects the operational and monitoring capabilities of the smart grid through its operational safety and stability. Through the network, information can be exchanged, and the transformer can share information with the process layer and the station control layer. On the premise of ensuring product performance, the integration of monitoring, control, measurement, protection, and metering is designed to achieve the integration of transformer components with actuators, sensors, and transformers.

Insulation level: There are standards for insulation levels. The insulation level of a transformer with a rated high voltage of 35 kV and a rated low voltage of 10 kV is represented as LI200AC85/LI75AC35, where LI200 indicates that the transformer has a high-voltage lightning impulse withstand voltage of 200 kV, a power frequency withstand voltage of 85 kV, and a low-voltage lightning impulse withstand voltage of 75 kV, and a power frequency withstand voltage of 35 kV. The current insulation level of Aux High-Tech Co., Ltd.’s oil-immersed transformer products is LI75AC35, indicating that the transformer has a high-voltage lightning impulse withstand voltage of 75 kV and a power frequency withstand voltage of 35 kV. Because the low voltage is 400 V, it can be ignored.

Industrial Marian Vasilescu

Oil in water analyzer factory with BOQU

Top rated Ammonium sensor manufacturer and supplier: Timely testing of water bodies and maintenance of water quality and hygiene are crucial. The main responsibilities of wastewater treatment facilities include collecting and purifying water, detecting contaminants, protecting public health, and locating and supplying resources to improve water quality. BOQU Instrument is a professional water quality sensor manufacturer in China, we provide various kinds of water online quality meter. Our water quality sensor can be matched with water quality meters of different brands at home and abroad. After decades of development, our quality has reached a World-class level, we can also provide OEM and ODM service, welcome to contact us. Read even more information at water ammonia sensor.

BOQU conductivity meter and conductivity sensor widely used in global,production capacity has been over 100 000pcs.TDS,Salinity and Resistivity meter use same conductivity sensor in different program.customers should confirm the application and required range before production,because there is many different range for conductivity sensor,such as :ultra pure water: 0~20μS/ cm(K=0.01),pure water is 0~200μS/ cm(K=0.1),drinking water is 200~500μS/ cm (K=1.0)in Shanghai China.max range of BOQU conductivity is 2000ms/cm.max working temperature is 180℃ by toroidal conductivity sensor(inductive conductivity sensor).it’s widely used for power plant,drinking water,waste water,food,Chemical production,Leak detection in heat exchangers,Acid and caustic dilution,Metal finishing, Plating bath control,Parts cleaning and rinsing,Pickling bath control,Waste streams,Semiconductors,Pulp and paper, Black, white or green liquor,Pulp bleaching food processing,Chemical peeling,Sanitisation (CIP),Environmental Wet chemical scrubbers,Cooling towers etc.

Successful aquaculture for fish and shrimp depends on water quality management.the water quality has directly effect on fish living,feed, grow and Reproduction.Fish diseases usually occur after stress from impaired water quality. water quality problems may change suddenly from environmental phenomena (heavy rains, pond overturn etc), or gradually through mismanagement.Different fish or shrimp species have different and specific range of water quality values,usually farmer need to measure temperature, pH, dissolved oxygen,salinity, hardness,ammonia etc.)

Future Developments: Ongoing research focuses on enhancing sensor accuracy, durability, and cost-effectiveness. Integrating artificial intelligence and machine learning may enable predictive capabilities, identifying potential water-related issues before they escalate. Water Quality Sensor – User Tips and Best Practices for Water Sensors, Strategic Placement and Proper Installation: Identify vulnerable areas prone to water damage and install sensors near potential sources like washing machines or sinks. Follow manufacturer guidelines for accurate placement, ensuring direct contact with areas susceptible to water accumulation.

BOQU Instruments is leader in water quality sensors and have two factory in Shanghai, production is over 100 000pcs last year, mainly water quality sensors for ph sensors, dissolved oxygen sensor, turbidity sensor, tds sensor, salinity sensor,conductivity sensor,residual chlorine sensor, suspended solid sensor, UV COD sensor, Ion sensor(F-, CL-, Mg2+, Ca2+, NH+). All water quality sensors is production according to ISO9001, and has CE, SGS, FDA certificates.Our water quality sensor can be matched with different brands of water quality meter at home and abroad and after decades of development, our quality has reached world-class, our most customers buy our water quality sensors to replace international brand, such as METTLER TOLEDO, Hamilton and Hach water quatliy meters and water quality sensors. So now many international company ask us to do OEM or ODM for them.

Water sensors utilize diverse sensing mechanisms, each tailored for specific detection purposes: Conductive Sensors – Employing two electrodes separated by a non-conductive material, conductive sensors detect changes in conductivity triggered by water contact. This completion of an electrical circuit prompts an alert, signaling the presence of water. Capacitive Sensors: Emitting an electrical field between two conductive surfaces separated by a non-conductive material, such as plastic, capacitive sensors sense disruptions caused by water. This alteration in the field triggers an alarm, indicating water presence. Optical Sensors: Leveraging infrared LED light, optical sensors detect alterations in the refractive index of the sensor’s housing material upon contact with water. This change prompts an alert, signaling the presence of water. Discover even more information on https://www.boquinstrument.com/.

How Do Water Sensors Work? Sensing Mechanisms: Water sensors employ different sensing mechanisms, such as conductivity, capacitance, and optical sensors. Conductivity sensors detect water by measuring changes in electrical conductivity when water comes into contact with conductive elements. Capacitance sensors detect water by measuring changes in capacitance when the sensor’s electrical field interacts with water. Optical sensors use light to detect water presence, often through reflection or absorption patterns.

Industrial waste water discharge standards are also classified by industries,such as paper industry,oily wastewater from Offshore Oil Development Industry, textile and dyeing waste water,food process,synthetic ammonia industrial waste water,steel industrial,electroplating waste water,calcium and polyvinyl Chloride industrial water,coal Industry,phosphorus industry water pollutant discharge,calcium and polyvinyl chloride process water,hospital medical wastewater,pesticide wastewater, metallurgical wastewater.

All drinking water will be treated from source water , which is generally a freshwater lake, river, water well, or sometimes even a stream and Source water can be vulnerable to accidental or intentional contaminants and weather related or seasonal changes.Monitoring source water quality then it enables you to anticipate changes to the treatment process. Usually there is four steps for drinking water process: First step:Pre-treatment for source water,also called as Coagulation and Flocculation,particles will be integrated with chemicals to form a larger particles,then the larger particles will sink to the bottom.

Manufacturing Patrick Moreau

Radar level transmitter supplier factory from China

Radar level measurement wholesale manufacturer today: Radar level meter adopts non-contact measurement, and has the advantages of high measurement accuracy, not affected by process conditions, easy to install and easy to maintain, so it is widely used in offshore oil platforms in recent years. Today, we would like to take you through several actual cases in offshore oil platform to understand the reasons and solutions of the radar level meter’s measurement value jumping. The first case was an oil field where the radar level meter in the left crude tank jumped to full scale several times during production. A sealed metal cover was used to cover the main body of the sensor, and during the test, it was found by connecting the radar level transmitter that the closed metal cover would result in more false signals throughout the measurement range, and the overall noise line would rise. See additional information at radar level transmitter.

Temperature Compensation- Precision in Any Environment Another advancement in guided radar level measurement technology is the incorporation of mechanisms that compensate for temperature variations. Temperature fluctuations in microwave module circuits can lead to inaccuracies in measuring levels. To tackle this challenge, radar level measurement systems have implemented creative solutions. A crucial aspect of these advancements involves allocating a portion of the radar transmission pulse as a reference pulse. This reference pulse serves as a benchmark for comparing measurements enabling temperature calibration. When temperature changes occur the radar sensor can adjust its measurements accordingly ensuring that environmental conditions have no impact on accuracy. This temperature compensation feature is particularly valuable in applications where significant temperature shifts are common. Industries dealing with temperatures or processes prone to variations, such as petrochemical or food manufacturing sectors, rely on precise measurements. Radar sensors equipped with temperature compensation mechanisms rise to the occasion by delivering reliable results despite changing conditions.

Measurement accuracy, the accuracy of ordinary radar is generally ±10mm, and the accuracy of precision radar is ±3mm. Selection according to the actual needs of production. Range, according to actual needs, choose the antenna size. Note that the actual range is reduced in complex environments. Antenna type and antenna size, the larger the antenna size, the larger the measured range and the stronger the anti-interference ability. The antenna types of radar level gauge are rod type, bell mouth type, paraboloid and so on.

The electromagnetic wave emitted during measurement can pass through the vacuum, no transmission medium is required, and the anti-interference ability is strong, and it is not affected by temperature, wind, water vapor, water mist, rain, etc. It can be used for liquid level measurement of almost all liquids, and can be continuously measured on-line unattended. Large measurement range, high precision, mature technology and stable performance.

Level Measurement Considerations: Taking advantage of a specific technology’s ability to reliably address the level measurement in either of these vessels, especially the blowdown flash tank, in a plug-and-play type installation and commissioning format is an easy way to ensure optimal performance. This forgoes calibration, external hardware or inputs. Estimates of up to 49 percent of the energy can be recovered through the use of flash steam routed to heat exchangers or the deaerator to preheat boiler makeup water or support the deaeration process, respectively. In addition, better level control technology at the boiler side eliminates energy losses resulting from unnecessary blowdown to prevent carryover conditions.

Secondly, in cement production, material level measurement encountered another difficulty is strong dust interference, especially pneumatic conveying powder silo, dust flying when feeding, low visibility, laser level meter and high energy ultrasonic level meter can not be measured, although radar level meter at this time can receive part of the surface echo. But the echo signal was also weakened. In addition, due to the uneven surface of the radar echo is refracted, will also lead to the existence of radar echo; In addition, there are some conditions from the bottom to the bin inflation, so that the material surface loose, material level measurement is more difficult.

As one of the most professional magnetic level indicators manufacturers in China,Guangdong Kaidi Energy Technology Co., Ltd. provides customized solutions for a range of industrial automation process applications,such as mechanical float level indicator.We specialized in radar level gauge, fork type level switch,etc. These were implemented successfully, and KAIDI magnetic level gauge manufacturers products,such as radar level meter, magnetic level indicators, can be used in many different industries such as food & beverage, water, energy, pharmaceutical etc. Discover more details at https://www.kaidi86.com/. Our Radar Level Meter has a range of up to 150 meters, frequency up to 120GHz and an accuracy of ±1mm, which can cope with various complex measurement conditions.

Humidity interference, when the humidity increases, it will cause the insulator resistance to decrease, the dielectric constant to increase, the skeleton to be fluffy, and the resistance to increase, resulting in an increase in leakage current and changes in capacitance and inductance. Also, it softens the colloid and reduces measurement accuracy. Chemical interference, chemical interference usually refers to some corrosive gases, such as acids and alkalis. The long-term action of these gases will not only damage the instrument and internal components, but also conduct electricity with the metal, affecting the normal operation of the radar level transmitter.

Working principle: Working principle of radar level gauge: UHF electromagnetic waves are transmitted to the liquid level of the container under test through the cable or antenna. When the electromagnetic wave touches the liquid level and is reflected back, the instrument detects the time difference between the initial wave and the echo, thereby calculating the liquid level height. Select guided wave radar or airborne radar according to the dielectric constant and measurement length of the measured medium.

The influence of dust accumulation on the transmitter head of the radar level meter, due to the large amount of dust in the working condition of the radar level meter, the dust is easy to adhere, and affected by the ambient temperature, the dust is wet and easy to agglomerate, and the dielectric constant will become larger and adhered The transmitter head and the wall of the bell mouth of the radar level meter affect the accuracy and stability of the radar measurement.

Manufacturing Amelia Whitehart

Top transformer equipment supplier factory

Transformer coil manufacturer 2024: The cut to length line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet. The special point of this ctl line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction. See more details on https://www.canwindg.com/products.

The manufacturing technology and product quality of electrical steel plate is one of the important signs to measure the development level of special steel production and science and technology in a country. At present, the quantity, quality and specification of cold rolled electrical steel in China cannot meet the needs of energy (power) industry development, and there is a big gap between China and Japan in terms of production technology, equipment, management and scientific research.Canwin is one of the most professional silicon steel sheet suppliers in China, which has been specialized in silicon steel manufacturing for over 20 years.Contact us, we are the best choice.

Canwin electrical equipment manufacturer provides diversified choices for customers. Distribution cabinet, power transformer equipment are available in a wide range of types and styles, in good quality and in reasonable price.Canwin collects scientific and rigorous of manufacturing and quality control management experience, in order to meet the different countries in different fields of capacitor products provide efficient, high-quality, fast service, so that the “Canwin”brand products win a good reputation all over the world.

Box transformer (usually referred to as “box transformer”) is a compact complete set of power distribution equipment composed of high-voltage power equipment, power transformer, low-voltage electrical equipment and auxiliary equipment. Canwin, a professional box transformer manufacturer & supplier, which focuses on the substation type transformer and traditional box type transformer design in the box shell, A box type transformer is an electronic device that transforms power into alternating current for the purpose of transferring power from one point to another.With small volume, light weight, low noise, low loss, high reliability. Transformer box is widely used in residential areas, commercial centers, light stations, airports, factories and mines, enterprises, hospitals, schools and other places. Find additional info at https://www.canwindg.com/

The metal laser cutting machine focuses the laser emitted from the laser into a laser beam with high power density through the optical path system. The laser beam irradiates the surface of the workpiece to make the workpiece reach the melting point or boiling point. At the same time, the high-pressure gas coaxial with the beam blows away the molten or gasified metal. With the movement of the relative position between the beam and the workpiece, the material will finally form a slit, so as to achieve the purpose of cutting. Laser cutting process uses invisible light beam to replace the traditional mechanical knife. It has the characteristics of high precision, fast cutting, not limited to the limitation of cutting pattern, automatic typesetting, material saving, smooth incision and low processing cost. It will gradually improve or replace the traditional metal cutting process equipment.Want to konw more about metal cutting machine, contact us, one of the most professional metal laser cutting machine manufacturers & suppliers in China.

As a professional energy storage system manufacturer, Canwin specialized in battery energy storage system and containerized energy storage system manufacturing. An energy storage system, often abbreviated as ESS, is a device or group of devices assembled together, capable of storing energy in order to supply electrical energy at a later time. In the energy storage systems, the lithium energy storage battery only interacts with the energy storage converter at high voltage, and the converter takes power from the AC grid to charge the battery pack. Or the battery pack supplies power to the converter, and the electric energy is converted into AC by the converter and sent to the AC power grid.

Insulation level: There are standards for insulation levels. The insulation level of a transformer with a rated high voltage of 35 kV and a rated low voltage of 10 kV is represented as LI200AC85/LI75AC35, where LI200 indicates that the transformer has a high-voltage lightning impulse withstand voltage of 200 kV, a power frequency withstand voltage of 85 kV, and a low-voltage lightning impulse withstand voltage of 75 kV, and a power frequency withstand voltage of 35 kV. The current insulation level of Aux High-Tech Co., Ltd.’s oil-immersed transformer products is LI75AC35, indicating that the transformer has a high-voltage lightning impulse withstand voltage of 75 kV and a power frequency withstand voltage of 35 kV. Because the low voltage is 400 V, it can be ignored.

CANWIN is not just a length lines company, but also electrical equipment manufacturer. It is the legend of people who have forged their lives with faith and action. CANWIN electrical machinery equipment manufacturing deploys an innovation chain through the industrial chain.Equipment sales can provide integrated solutions; can provide OEM/ODM services to global transformer manufacturers; can provide raw material supply to transformer manufacturers. In the form of cooperation and mutual benefit, set up the transformer manufacturing center and core processing base in the Middle East, India. Dubai. Vietnam. Thailand. etc.

Shopping John Concrane

Reliable stuffed animal snakes online provider

Japanese stuffed animals online supplier from KawaiiMerchandise 2024: What are Kawaii Japanese Squishmallows? Kawaii Japanese Squishmallows are a line of plush toys that originated in Japan. “Kawaii” is a Japanese word that translates to “cute” in English, and these squishy toys certainly live up to their name. They come in various animal designs, each with its own unique personality and charm. From cuddly cats to lovable llamas, there’s a Squishmallow for everyone. Why are Kawaii Japanese Squishmallows so popular? Discover more information at Kawaii Stuffed Animals online provider.

Why buy a large stuffed animal? Haven’t you always hoped that your plush buddy was just a little bit bigger or maybe even a heck of a lot bigger? Well, that’s where we have you covered because some of the most adorable stuffed animals you can buy your kiddo also happen to be some of the biggest. A large stuffed animal can be fun and snuggly to cuddle. It can make a perfect addition to any kid’s (or adult’s) bedroom. What should you consider in a large stuffed animal? Size: No, not every stuffed animal you come across will really look like a giant, but some come wondrously close. Because of this, there are varying degrees of the size you’ll want to consider with an oversized plush because not everyone has the space for a human-sized toy lying around the house.

Aaah, stuffed animals, we all have one we love, but have you ever stopped to ask the question why? Why do stuffed animals make us feel so good and what is the science behind that? And what are the best-stuffed animals for anxiety, well, all you need to do is to sit back and relax as we lay down all the information that can be played down in one article, and hopefully by the end of this, you’ll feel a bit more grateful next time when you hug your beloved teddy! And without further ado, let’s dive right into it!

Who made the first plushie toy ? One other possibility about the first plushie was that it started in France in 1863, by Margarete Steiff and her family. She wanted to sew for children again as her grandmother did. With her husband and their children, she had established a small sewing company. After her youngest son, aged 27, died from tuberculosis, the couple decided to close the business. In 1879, Margarete’s husband died. Gustav, a shoemaker, remarried Margarete and helped her open another toy shop in 1880. It featured stuffed animals just like you would find in any other toy shop.

It’s a lot of fun to play with this sea turtle. Kids may snuggle up to him during storytime, and he can keep their bed safe during the day. He’s a lovely color and a cuddlier version of the real thing! While he may not live as long as sea turtles do, he is unquestionably hardy. Little ones don’t like it when they’re chilly. This relaxing stuffed companion will help any chilly child warm up again in a rush whether you reside in a location that is due for cooler weather or if your toddler has caught a cold. This penguin will provide the necessary warmth and companionship for your kiddo.

Diminutive Darlings: In the world of teddy bears, size isn’t an obstacle. Crafted by South African “…” creator Cheryl Moss, the tiniest commercially available stitched teddy bear stands at a mere 0.29 inches. While her larger creations just surpass half an inch, these miniatures carry immense charm. A Separate Evolution: The existence of stuffed bears owes gratitude to more than just Theodore Roosevelt. Margarete Steiff, a German toy maker, fashioned a stuffed bear in 1903 upon her nephew’s request. Sparked by a zoo visit, her design included button eyes, stitched features, and movable limbs – a design not unlike the American bears that later surged in popularity.

In order to operate properly, our pets, like us, require physical and mental stimulation, which is why treating your dog with a nice toy is always a good idea. Here are some of the best stuffed animal for dogs When it comes to designing some of the greatest toys to keep dogs occupied and delighted, KawaiiMerchandise.com is no stranger. This brand can’t be topped, from a fuzzy, loopy hedgehog to a hilarious Chiouaoua stuffed animal. KawaiiMerchandise.com is known for providing boredom-busting toys for dogs of all shapes and ages when it comes to indulging your dog. These toys are meant to endure a long time by removing the stuffing that dogs are accustomed to pulling apart. Read more info on https://kawaiimerchandise.com/.

Teddy bears and bunnies were previously assumed to be children’s bedtime companions, but it turns out that many adults now sleep with stuffed animals. On social media and in online op-eds, people have written about their own experiences sleeping with stuffies. One Reddit member says, “I’ve attempted to sleep without them, but no matter how exhausted I am, sleep just doesn’t happen unless I’m snuggling my teddy bears.” I don’t understand why I do it, but I never stopped sleeping with a stuffed animal as a child. Adults with stuffed animals’ psychology is a more bottomless pit than you’d thought. The emotional attachment to stuffed animals and adults was marketed to be harmful through the years, and in this article, we will shed light on some important facts that will change your whole perspective on the matter.

Couples who are already together are given such teddy bears as gifts. White is a colour that represents purity, innocence, and tranquillity. This teddy bear will transport you back to your youth and fill you with a nostalgic sensation of affection. This is also a symbol of a cheerful and successful attitude. This colour is associated with feelings of tenderness, love, and compassion. This can also be seen as a sign of unending and unconditional love. Furthermore, receiving a pink teddy bear indicates that the other person has accepted your proposal. It’s a subtle manner of expressing one’s feelings for another. Be on the lookout for a proposal to come your way! Orange teddy bears are a hint that your lover is about to propose to you. So, if you get an orange teddy bear, remember to get ready for the next big occasion, since engagement rings are on the way.

Industrial Marie Poppins

High quality detergent powder making machine manufacturer and supplier

Excellent detergent powder production line factory: Technology characteristics: Emissions of waste gas of whole production system reach standards, no sewage discharge. Tail-gas after drying is dealt by primary deduster and secondary hydro-deduster. Save energy as well as meet emission standard. Fine powder is completely back to tower, improve yield of base powder. Workshop environment is provided with perfect dedusting system, ensure the workshop environment clean. Control system can adopt simple manual operation or central computer integrated automatically control. Read extra info at detergent powder making machine manufacturers.

How Does Meibao Liquid Detergent Production Line Works?All kinds of materials are measured and put into the slurry tank in order according to the process sequence. The semi – finished liquid detergent is prepared by mixing, stirring and fully reacting in the slurry tank. Then, the semi-finished product is put into the static tank, where the material is cooled and settled, and the air bubbles in the material are removed to obtain the product with stable phase. The static tank is usually set at a height, and the finished product is transported to the filling line for packaging under the action of gravity. The finished products are packed in boxes and sent to the product warehouse for storage.

Calcium chloride is a white or off-white porous block, granular and powdery product. It has widely used in desiccant, dehydrating agent, refrigerant, building antifreeze, deicing agent and fabric fireproofing agent. The production methods of calcium chloride is hydrochloric acid and limestone method. The products are of good quality and widely used. Most of them are produced by by-product hydrochloric acid, mainly anhydrous calcium chloride.

Adhering to the business philosophy of “people-oriented, scientific and technological innovation, respect for nature, rational utilization and sustainable development, benefit the society”, we always provide customers at home and abroad advanced technology, first-class products and perfect service. We insist on that when we give customer the benefit and assurance, we also contribute to the continuous development of energy in china and improvement of people’s life. Read additional details on cnzjmb.com.

The main ingredient of sodium silicate is Na2SiO3, it’s water solution is called water glass. Because of the different metal ions in the main material quartz sand, the color of sodium silicate may be colorless, green or brown. The mol radio of SiO2 and Na2O of sodium silicate is called modulus, divided into low modulus, medium modulus and high modulus. Sodium silicate production process is divided into dry process and wet process. Dry process can produce sodium silicate with various modulus, wet process is suitable for producing low modulus sodium silicate.

Recent Posts

Categories

Archives

Meta