Quality universal tensile testing machine supplier
Top rated footwear testing equipment wholesale? Universal Testing Machine For Tensile Test Principle: Fiber tensile strength test machine is driven by the AC servo motor, through the synchronous belt and synchronous wheel drives the ball screw rotate, to make the beam up and down, after stretching or compressing the sample by the analysis of force sensor data from a computer system. The design of Universal Material Testing Machine is compliance with ISO, JIS, ASTM, DIN, GB, etc. See more info on taber abrasion tester.
The principle of testing that you should know: Stitch the sample with one or two pieces of specified multi-fiber adjacent fabric, which is placed in soap solution or other washing solution, mechanically stirred at the specified time and temperature, cleaned and dried. Taking the original sample as the reference sample, assess the discoloration of the sample by the left gray scale, and then assess the color stain of the adjacent fabric by the right gray scale.
Correct use of computerized universal testing machine: When the electronic stepless speed regulation adjusts the lifting speed, it cannot be operated too fast. Before using the 50KN power machine, pay attention to check the tightening of the clamp tightening screws. When lifting the lower clamp, the movement should be stable, avoid collision, and often check the tightness of the clamp screw. When replacing the test fixture, pay attention to cooperate to prevent bruises.
Light Fastness Testing Machine apply to light color fastness, anti-climate color fastness, light & perspiration color fastness and light aging tests of textile, paint, dye, coating, rubber, plastic, wood floor, paper and other materials, it have anti-climate functions of exposing to the rain, revolution and mist spraying. Gester Instruments Co.,Ltd has professional experience on the production of Light Fastness Tester. The following are the characteristics of colorfastness to light test machine. The sample is tested with black plate thermometer (BPT), black plate standard thermometer (BST), irradiance detector at the same position (in equidistance) to really indicate measuring state of the sample, the tested data is transmitted synchronously by using technolody of radio frequency.
Pneumatic Bursting Strength Testing Machine For determining the bursting strength of woven or knitted fabrics, non-woven, paper, leather and board by application of a pneumatic load under a rubber diaphragm of a specific area. Provide with a digital readout of pressure with peak value hold facility, renewable rubber diaphragms, and manual clamping device with acrylic bell, forward reverse and neutral drive system. Provide accurate elongation information of fabrics, up to 0.1mm.
GESTER instruments is a textile testing equipment manufacturers, company which integrates research & devolepment, prodution and sales in one. So far, GESTER instruments owns two production factories and four sales teams for textile testing instruments, footwear testing equipments, children’s product tester and furniture tester. We have applied for dozens of patents from the State Intellectual Property Office. As one of the best textile testing equipment manufacturers with 20+ years experience, With GESTER instruments’s advanced design, excellent manufacturing technology and strict quality management, GESTER instruments has build the longterm cooperation relationship with tops of international testing institutes as SGS, Bureau Veritas, TUV, UL and Intertek, etc. We specialized in textile testing instruments. Read extra information at https://www.gesterinstruments.com/.
Scope of ASTM D4060 Taber Abrasion: ASTM D4060 Taber Type Abrasion Tester GT-C14B tester is a test to determine a plastic’s resistance to abrasion. Resistance to abrasion is defined as the ability of a material to withstand mechanical action such as rubbing, scraping, or erosion. Abrasion can be difficult to compare but haze variation or weight loss are often evaluated. This test method covers the determination of the resistance of organic coatings to abrasion produced by the Taber Abraser on coatings applied to a plane, rigid surface, such as a metal panel.