Best rated car check engine light on solutions from MOT centre in Reading, UK

Auto light on for check engine solutions with MOT centre in Reading 2023: An aftermarket alarm system can wreak havoc on your car if it’s not installed properly. It can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. Then, when you least expect it, it’ll go off in the middle of the night because a leaf from an oak tree fell on the hood. If the above issues sound familiar, you’ll need to have the alarm fixed, reinstalled, or replaced entirely by a competent mechanic. Getting it done right in the first place might cost a little bit more, but the peace of mind that comes with having a fully functional alarm is priceless. Discover even more details on Car in Limpmode.

Are Labour rates are one of the best in the industry less than half of the cost of man dealer rates yet supplying the same standard of workmanship at all times. We have many valuable customers in Reading and the surrounding areas of berkshire who are very happy with the service that we provide, but don’t just take our word for it please see our google reviews to see what our customers are saying about us. We work on all models of vehicles including petrol and diesel engines we also offer a car recovery service and we also have a Car Body Repair shop within our premises.

It’s hard to beat the convenience of a mobile mechanic servicing or repairing your car. They come to your home or office, you toss them the keys, and an hour or three later it’s all done. It is that easy, but there are a few things to keep in mind when you book a mobile mechanic. The correct details: So you’ve booked your mobile mechanic visit. Be sure that your contact details are correct, and that you’ve provided additional information if your location is a little tricky to find. On the day you should ensure that you have your phone nearby so that the mechanic can let you know they’re on the way, delayed, etc.

The car service checklist is an important guide to understand what is needed and how it can help you save money and keep your car in the best condition possible. Don’t be tempted to drive without an MOT If your vehicle has failed its MOT – or you haven’t booked one in – then address this as soon as possible. Driving without an MOT can lead to serious penalties. If caught, you can be fined £1,000 for driving a car without a valid MOT certificate. If you choose to drive a vehicle deemed ‘dangerous’ by an MOT test, you can be fined up to £2,500, be banned from driving, and receive 3 penalty points.

A company which can offer quick free collect and delivery service of the car will be of the best. To know more about the delivery of the services, you need to ask the company about the services they offer. In most cases, the car repair centers will offer an estimate of the time they can take to deliver. It is always necessary to ask and get prepared to that you can make the right decision.

An MOT involves dozens of checks on your car, ranging from the brakes and fuel system to lights, mirrors, seatbelts, windscreen wipers and exhaust system. You can also get an MOT done at a local council test centre. These test centres don’t normally carry out repairs as well as MOTs. It doesn’t cover the condition of the engine, clutch and gearbox. To find your nearest authorised MOT test centre, visit these websites. How long does an MOT take? An average MOT test takes between 45 and 60 minutes, but there are a couple of other things to take into consideration.

In addition, our company is also capable of offering insurance claims assistance, alternatives on part options and even advice on appropriate repair answers. Our customers’ care desk and technicians within the company are always friendly when they speak to any kind of client that is they usually use clear kind of language when explain the technical processes.

Although they might not seem as important as tire rotation or oil change, replacing the windshield wipers is also important. If you’re caught in a storm and your windshield wipers don’t work properly, you could put everyone around you in danger. Windshield wipers are not only affordable, but they’re also easy to change on your own. You can get them in all auto parts stores, and the instructions are on the back of the package. Of course, if you doubt your skills, you can always ask an auto parts store employee to change them for you. While you’re there, don’t forget to check your wiper fluid levels.

Tips for you to locate the best free Collect delivery service for Car Servicing and Mot Deals around Reading and the whole of Berkshire. Check on the qualification of the mechanics. To be assured of great services, you need to check on the qualification of the experts. There are some experts who have great experience. You stand a better chance of enjoying the best services if you can go for a highly experienced car mechanic. If you can carry out research on a given car repair center, then you will be in a better position of knowing whether a given car repair centre can assure you great services. Hiring mechanics who are highly experienced will be the best idea because they will make you enjoy their great services.

You can always seek the help of an expert when choosing the right air filter, engine oil type or wiper blade for your vehicle. Moreover, you can ask a friend or family member to help you with the installation too. Here is a complete car maintenance checklist that makes the repairs easier and minimise your car repair cost to some extent. While many of the major car jobs are dangerous or require the careful hand of a mechanic, there are many more that you can simply do yourself. Once you learn the DIY techniques, minor car repairs can become easier for you, for instance, changing the car air filter and wiper blades.

Book a Car Service and combine With a Mot and we will reduce the Mot Cost to £35.00 saving you 50.00% Great offers are available for a limited time only. Also we are Now operating a Mot test reading service up to 2330pm in the evening Monday through to Saturday for those that can’t get here through the week due to work commitments, we will also collect your car anywhere within a 10 mile radius of our garage free of charge flexible collection and drop of times are also available. We now operate a 24 Hour Recovery service for our customers, have your car or van recovered to our garage to be fixed by us and we will offer a 20% discount.

Check your windshield wipers to see if there are any fraying, cracks, hanging rubber, or bends. If so, it’s time to change your windshield wipers. Another more obvious way to determine if your wipers are still effective is to wet your window and turn them on. You can squirt your windshield washer fluid or just pour some water on the windshield. The water should wipe away easily without blotting or streaks. If streaking, use a rag and wipe away any dirt and oil from your blades and window then retry. If not wiping evenly and cleanly, have your wipers replaced.

You need to be sure about the quality of equipment that is being used. Ask if they have support vehicles in most places. There is no need to register with a company that is centrally located in the city centre with no support vehicles across the nation. The aim is to be rescued within the shortest time possible. If you find that your prospective company does not respond to emergency calls within half an hour, then know that you are not safe. Choose a good car breakdown recovery service Car Recovery Berkshire for the help you may need. Read more details at https://www.mot-centre.com/.

If you live in a remote location, the towing can cost you more than the mechanic’s fees, You can save a lot of money by hiring a mobile mechanic. If you own a car, you must have heard about the mobile mechanic services. These professionals can fix the vehicle problems at the breakdown site as there will be no need to visit the mechanic workshop. It is hard to take your vehicle to the mechanic Garage without having to pay for the recovery of your vehicle.

Residential real estate solutions in Belize by Remax

Best commercial real estate offers today in Belize: English Speaking: Belize is in both the Caribbean & Central America. It is the only English-speaking country in the Central America region. This makes doing business, traveling, and living in Belize much easier. There are a variety of real estate opportunities and investment properties in Belize. If you’re considering making a real estate investment or buying a property in the booming Caribbean market of Belize, the team at RE/MAX is here to help. Learn how you can own and invest in Belize real estate and find your perfect property in paradise! See even more details on Remax Belize.

You also want the Closing Company to look over the proposed purchase agreement, making sure the information is correct and ensuring it’s in full compliance with the local and governing laws of Belize. A Closing Company is particularly important if you are choosing to finance a property with the seller because a payment processing company is often needed. It is also common in Belize for a closing company to use an Escrow Agent and/or Escrow Account. This helps to protect the buyer and the seller during the real estate transaction. Since most real estate transactions in Belize are done in USD it is common for the Escrow Account to be in the US and with a US Bank account.

When buying Belize Real Estate, it is advised to work with a Belize Real Estate agent and Closing Company. When buying land or property in Belize the real estate agent will draft a formal offer of purchase or agreement of sale and present it to the land owner. The Belize real estate agent will require the full name and address of both the “Purchaser” and the “Seller” with the legal name of the property (Lot Number & Parcel Number). The property will have an identification number which is given by the Department of Lands and Survey Office. Standard land and real estate agreements include a property title search.

The Mountain Pine Ridge Forest Reserve offers a soothing contrast to the tropical humidity of the coast. The higher elevation here keeps daytime temperatures cool and offers a welcome respite from mosquitoes. Hiking among the pine forests, visitors can explore cool gushing rivers, waterfalls, pools, and caves, although in recent years, the pine beetle has devastated many of the trees. One of the top attractions within the reserve is the Río Frio Cave & Nature Trail, once used by the Maya as burial grounds. A river runs through the center of the cave. At the Five Sister Falls, five cascades spill into a beautiful pool. For a refreshing dip head to Río On Pools where small waterfalls connect a series of pools carved from granite boulders. The slabs of rock are great for basking in the sun after a swim. Also called Hidden Falls, Thousand Foot Falls are surrounded by hiking trails. Visitors can enjoy beautiful views of the area from the observation platform here.

Belize attractions and climate makes purchasing a house here a sweet thought. Imagine living permanently there… the joy. As Ambergris Caye, San Pedro and Belize continue to grow at an unprecedented rate, as so the opportunities for Real Estate investment does as well. Within Belize, Secret Beach has become one of the top emerging locations for locals and tourists. Secret Beach features pristine Caribbean ocean, no sea grass, sunset views, private inlets and so much more as the area continues to develop… it really can’t be beaten.

Do I Require a Visa to Travel to Belize? There is no Visa or Travel Visa required when traveling to Belize. When you enter Belize (by air, land, or sea) you are issued a tourist visa for 30 days. You can renew this visa every month at a local immigration office. Some countries have a maximum of 30 days without a visa and no visa is required for Belize travel. Please keep in mind that while a visa is not required, travelers to Belize must have: Hold a valid passport that is still valid for at least six months on entry; the passport must have one blank visa page; hold proof of onward/return flights; Hold all documents required for the next destination (if you are connecting to somewhere else); You may be asked for proof of sufficient funds relative to your intended length of stay.

Belize Real Estate Purchasing Process: The property purchasing process in Belize is similar to Canada or the US (countries with fee-simple titles). Before you purchase property in Belize or buy Belize real estate it is important to know and understand the process. Ambergris Caye real estate is popular due to the fact that the island and San Pedro Town is the country’s most popular destination with the highest level of growth. Let the Remax Belize team help you with your Belize property & Belize real estate search. We can help go over the different options and opportunities available in Belize.

With decades of experience in Belize Real Estate and working with RE/MAX Will has helped hundreds of clients find their dream homes or investment properties while personally being invested in numerous deals in this market. After years of experience in Belize and working with RE/MAX Will took on the role of “Regional Owner” for RE/MAX in Belize in 2019. Growing not only RE/MAX in the region but the global awareness of Belize. Discover even more details on https://remaxbelizerealestate.com/.

Cutting discs supplier IE in 2023

Welding helmets provider in Ireland? If you’re looking for the best portable weld fume extractor that would be small but powerful and also would come within an affordable price range, then BAOSHISHAN has the perfect device for you! This fume extractor absorbs all sorts of gases and dust generated by soldering and welding. The 1.2m smoking pipe is an added benefit to this fantastic device. Compact Design and Convex Tips. This small and compact machine has a state-of-the-art build quality that ensures high performance. The filters come with metal latches that seal off the fumes and don’t let any fume get out of the device. The pipeline’s sealing and stability are improved by fine convex tips. The machine comes with sturdy wheels that help to move the unit to anywhere you want. Its suction pipe is built with several small pipes which allow it to move around freely. Read additional info on https://www.weldingsuppliesdirect.ie/welding-equipment/robotic-welding.html..

One of the “cardinal sins” that almost every shop commits is over-welding. This means that if the drawing calls for a 1/4″ fillet weld, most shops will put down a 5/16″ weld. The reasons? Either they don’t have a fillet gauge and are not exactly sure of the size of the weld they are producing or they put in some extra to “cover” themselves and make sure there is enough weld metal in place. But, over-welding leads to tremendous consumable waste. Let’s look again at our example. For a 1/4″ fillet weld, the typical operator will use .129 lbs. per foot of weld metal. The 5/16″ weld requires .201 lbs. per foot of weld metal – a 56 percent increase in weld volume compared to what is really needed. Plus, you must take into account the additional labor necessary to put down a larger weld. Not only is the company paying for extra, wasted consumable material, a weld with more weld metal is more likely to have warpage and distortion because of the added heat input. It is recommended that every operator be given a fillet gauge to accurately produce the weld specified – and nothing more. In addition, changes in wire diameter may be used to eliminate over-welding.

How to pick a welder tips: Duty cycle: The advertised amperage of the machine offers a headline guide, but the duty cycle of the machine gives up the truth. Light industrial machine duty cycles can be as low as 20%, but more heavy duty MIG’s should range between 40-60%. If a 300amp MIG has 30% duty cycle for instance, it’s on the edge of acceptability. Duty cycle is determined by how many minutes out of 10, it can weld at 100%. Duty cycle testing: MIGS tested at 20 Degrees & 40 Degrees we consider good. (Beware any manufacturer who doesn’t quote an ambient temperature for testing) Manufacturer’s warranty: Always a great guide to quality. A three year warranty is good. Weld characteristics: Make sure the arc is smooth & suits your application. (Some machines are better suited at the low range and others at higher amperage range).

The duty cycle is the amount of time the welder can run continuously before needing to cool down. It’s expressed as the percentage of 10 minutes the MIG welder can run. So a 20 percent duty cycle at 90 amps would mean that when you’re welding at a 90 amp rating, you can go continuously for 2 minutes before the welder needs to cool off for 8 minutes. That means if your 140-amp welder is rated for 20 percent at 90 amps, it’s probably only able to weld for less than a minute at the full 140 amps. How Much Power Do You Need? This is the single factor that affects the cost of MIG welders. Newer 120 volt machines are able to run up to 140 amps, good enough for ?-inch steel. However, at that rating, the duty cycle will be fairly short. That’s not a big concern for home hobbyists and weekend warriors, but it will really put a cramp in your style if you’re doing production welding. Dual-voltage machines are now beginning to provide a lot of control, at least on the 240 side, but unless you’re buying big-name stuff that can get pricey, it’s likely the 120 side won’t provide the same quality of welds.

Some advices on welding equipment, MIG and TIG welders, plasma cutters. TIG welding is similar to to a MIG welder as it uses an electric arc in the same was as MIG welding does but differs in a few ways. Instead of a continuous spool of consumable wire, a TIG welder uses long tungsten welding rods that are manually slowly fed into the weld puddle to join the metal. TIG welding requires gas, usually argon, to protect and cool the weld puddle from external contamination. TIG welding is more suited to welding thinner materials such as stainless steel and aluminium as you can get the power down lower to reduce the risk of blow through and can even weld two dissimilar metals. Suitable for tricky welds such as S curves but TIG welders are still capable of welding heavier materials depending on the machine. TIG welding takes more practice that MIG welding as the process is much more manual with controlling the torch, welding rod and gas by hand (and foot for the gas) but once mastered will produce the highest quality welds making it the better choice where perfect, precise welds are required but due to the manual process is the least productive.

While no-one can tell you for certain which is the right MIG welder for your needs, the reviews and insights that we’ve provided above should give you some information into the top-selling and best-rated welders available on the market today. Of course, as you begin to practice MIG welding with your favourite tools, you might find a specific brand or style of welder that works best for you. Whether you’re MightyMIG100a beginner or an expert, we think that the Sealey MightyMIG100 welder is probably one of the best options to start your MIG welding adventure. Not only is Sealey one of the best-known brands in the welding industry, but this heavy-duty welder is great for almost any project. It comes with a few added extras to improve your welding experience, including a comfort grip non-live torch, a 1.8-metre cable for power, a 1-metre gas hose and 0.45kg flux-cored wire. It arrives set and ready-to-go, with a welding current of 100Amp and 230V power. Additionally, it is a compact and a lightweight option, weighing only 15.4kg However, if you are looking for something for your business, you could always consider upgrading to the Sealey MightMIG180 for an extra dose of power. The 180 is particularly well-suited to the high-impact jobs that might take place on an industrial site or in a manufacturing garage. Find more details at https://www.weldingsuppliesdirect.ie/.

I’m a huge fan of Makita’s cordless LXT range. The DGA452Z is one of the best angle grinders available right now, and it’s a bit of a beast. The grip shape is nice and narrow, with comfortable rubberised overmoulding on the rear handle. Once you’ve installed a battery it’s well balanced and doesn’t feel too heavy at 1.3 kg without a battery installed. The Makita cordless grinder has a powerful brushless motor that’s efficient as well as powerful. It puts out a whopping 11,000 rpm, which is incredibly impressive for a cordless grinder. When you pair it up with a high Ah battery, it squeezes every last drop of power and runs for a surprisingly long time. It features a soft start function, battery gauge, and overload protection as well. There’s an anti-restart function for added safety between battery changes. One of the most impressive features must be the automatic speed control though. The internal computer controls the power output according to the load conditions, which makes for better cuts and longer tool life.

Milwaukee 4208-1 Electromagnetic Drill Press is manufactured in the United States. It can perform heavy duty drilling and can handle the toughest drilling jobs with up to a ¼ inch threaded holes capacity. With no load, the two-speed motor can run at 250 and 500 rpm. It can pressurize about 1670 pounds on a 1-inch of the plate. Milwaukee 4208-1 Electromagnetic Drill Press is a combination of Milwaukee’s 4203 adjustable base and the 4262-1 electromagnetic drill press. Thus Adjustment of support is super easy. This first drill press is made for professional grade job work. It equipped with professional grade feature which ensures versatile usage to perform any job work.

If you’re looking for quality metal grinding wheels, Makita is a brand worth checking out. This wheel is perfect for quickly grinding through metal, making it an essential tool for any serious metalworker. With its durable construction and precision-cut teeth, the Makita Metal Cutting grinding wheel is sure to become a favorite in your workshop. These angle grinder wheels are designed for use with Makita 5? angle grinders. It has grain grit, a hard bond matrix, and wheel thickness that provide the best balance. This tool will cut more than other wheels because it’s made of carefully selected materials. You can use it to cut through all metal materials, including metal, steel, and inox steel. In addition, this product can even cut through sheet metal, rebar, steel pipe as well as small to medium diameter pieces of solid material. The grain on these cutting grinding wheels is made from a high-performance aluminum oxide which will provide a long life span for the product. Not only does it lasts a long time but also the material is able to soothe many tough materials with little effort.

ESAB is a world leader in the production of welding and cutting equipment and consumables. Our innovative, world-renowned equipment and solutions are developed with input from our customers and built with the expertise and heritage of a global manufacturing leader. For each discipline, continuous development of methods, materials and know-how is being directed to meet the challenges posed by the diversity of industry sectors we serve. ESAB is organized to deliver efficient, high-productivity solutions to meet customer requirements in a manner that exceeds their expectations no matter the market segment. Continuous Improvement (Kaizen) Is Our Way Of Life – Set breakthrough objectives, experiment and learn every day, eliminate waste in our business processes, and benchmark the best, then better them. Living this value is done through understating that Change is a Must, and the use of Tools for Improvement. To live this value each ESAB associate fosters an environment of continuous learning employing the Colfax Business System Tools which is the basis of our culture.

Welding Supplies Direct are the UK distributor for GPPH welding tables, manufactured to the highest standards in Europe. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. Our modular welding benches come equipped with a hole system of all sides (tabletop & all sides); the holes are 28MM in diameter and have a chamfered edge for easy tool assembly. You have the option of standard legs or castors being fitted, too.

Forney have built a simple, mid range MIG welder that’s solid and reliable. It has some good power for the price but doesn’t have as good a duty cycle as the Hobart 190 or Lincoln 180. Forney aren’t one of the big three brands but this machine is still solidly built and I’d feel comfortable buying this. If you want a basic 220v welder without any special features, this is a good choice. Read the full review here.

Out of a huge product range of the Dirty Pro Tools, we have found a top-grade MIG welder that turned out to be so good that we have decided to add it to this shortlist. It is the tool for welding metalware of medium thickness with the output range from 50? to 60?, best for sheets up to 2 mm thick. In addition, a pretty powerful converter of this welder allows working for about 6 minutes at 50?. So, you’ll be able to weld thin pieces for a good while, and the fan will provide a decent cooling of the tool. However, when the MIG welder overheats, the red light will flash telling you to stop welding and make a pause. By the way, you can pick either of 4 available amperage settings and adjust the wire feeding speed for reliable and straight welds. We were pleased by the package that includes a face shield, a clipping hammer, a brush and a spool of welding wire, so you can start welding right after unpacking the unit. So, this Dirty Pro Tools welder is one of the most affordable models for people seeking a mid-power machine to weld fine metal sheets.

United Kingdom market choice: Metal inert gas welders—also known as MIG welders or gas metal arc welders (GMAW)—are the most commonly used welding machine, competing with the also successful TIG (tungsten inert gas or gas tungsten arc welding) and stick welders. For both at home and industrial use, metal inert gas MIG welders are known for their efficiency at fusing all kinds of metals together. Dependent on your welding skill level, whether you’re experience or looking to start welding; a metal inert gas level could be a process you’d want to try out.

Use Proper Handling Equipment to Move the Cylinder: Using a proper handling equipment is important while handling the cylinder within the facility or transporting it to a different location. Always use proper Manifold Cylinder Pallets (MCPs) or cylinder trolleys when moving individual cylinders. If moved to a different location, then the vehicles or containers used for transporting must use the relevant Haz-chem code, MSDS, and TREMcards, irrespective of the color code of the cylinder. Inspect the Cylinders before Using Them: A stored cylinder must be inspected for any signs of impact, discoloration, heat damage or other signs.

Car MOT services in Reading 2023

Top car MOT inspection Reading, UK: If the car pulls to one side when you apply the brakes, this suggests a problem that requires further attention before you take your MOT. If you have alloy wheels, it may be possible to carry out a visual inspection of the braking system without removing the wheel. Check for excessive wear of brake pads or pitted brake discs as this could be an indication that your brakes need replacing. You should also test your handbrake – this needs to be strong enough to hold your car stationary so be sure to test this, especially on an incline. If you’re not sure, why not pop into www.mot-centre.com for a free brake check ahead of your MOT.

Looking for Mot near me in Reading area? An MOT might also be included in the cost of a full service for your car. While servicing your car regularly is a good idea, a service, even if it includes an MOT, is likely to be more expensive than an MOT on it’s own. Nearly two in five MOT tests fail first time. Yet often this is because of minor faults the owner could easily have fixed themselves before they paid for a test. The steering and suspension; The steering and suspension on your vehicle will be rigorously tested including your steering oil level and your vehicles steering pipes/hoses for corrosion and loss of power. If your vehicle has power steering this will also be checked.

An MOT involves dozens of checks on your car, ranging from the brakes and fuel system to lights, mirrors, seatbelts, windscreen wipers and exhaust system. You can also get an MOT done at a local council test centre. These test centres don’t normally carry out repairs as well as MOTs. It doesn’t cover the condition of the engine, clutch and gearbox. To find your nearest authorised MOT test centre, visit these websites. How long does an MOT take? An average MOT test takes between 45 and 60 minutes, but there are a couple of other things to take into consideration.

With a regular maintenance schedule and a little elbow grease, you may be able to save time and avoid costly repairs in the long run. Set a schedule that works for you and you’ll stay on the road and out of the repair shop. Keeping up with your car maintenance probably isn’t the most thrilling item on your to-do list. But paying a little bit of routine attention (and cash) on your vehicle is completely worth it—for your safety and your savings. It’s just as important to keep the backup tire inflated as it is the four tires under your car. The last thing you want is to discover your spare is flat while you’re pulling the jack out of your trunk. It’s better to spend a dollar at the air pump every few months to inflate your spare than to spend hundreds on a tow truck in your time of need.

Why Choose Us for your vehicle servicing: Simply because we are reliable our work is second to none and we take great pride in our work we offer a free collection and delivery service to all our customers dont take our word for it check out our online reviews see what our customers are saying about us we are friendly polite and considerate. If you have booked and combined your yearly Mot with a Service and your vehicle fails its annual Mot we will stop work phone you and give you the choice weather you have the Mot failure work carried out and not the Car Service or instruct us to do all the work.

Keep up with oil changes. When oil levels are low, or oil is old, added friction between moving parts can cause wear and tear to the engine. Follow your owner’s manual to determine the best intervals for changing oil. Check the brakes every time the oil is changed. Take care of your tires. Check and maintain proper tire pressure. Tires inflated within five pounds per square inch (PSI) of their recommended level improve gas mileage and general handling of your vehicle. Recommended PSI can be found in the owner’s manual. Rotate tires every 5,000 to 8,000 miles.

If there’s a problem, book an appointment to go and show them the vehicle. Depending on what car you drive, they may even visit you to survey the car’s needs. If not, drop off your car and take a cab to work supplied by our sister company 1st Class Cars. if it’s just the matter of a day or two. Where To? Finding The Right Car Servicing Centre Tilehurst Your car’s make and model may have you visiting someone around the corner, or someone quite a distance away. If it’s the latter and you like the way they work, stick with them. If you’re looking for a change, look up a few authorized servicing centers for your car model. See even more info on www.mot-centre.com.

Your car needs extra care. Just getting serviced does not ensure that the car will not face any problems. No car customer would want their car to be deceived midway. But this problem can happen with all types of vehicles, new and old. Therefore it is necessary that some things should be taken care of. Here we are telling you about those 5 things that you should always keep in the car.

Not every chip or crack on a windscreen will cost you an MoT certificate, as it’s all down to location. The details may seem complicated, but as a rule of thumb you can get away with chips smaller than 10mm in front of the driver. Any damage bigger than 10mm in front of the driver – and also in the glass area swept by the wipers – will be an MoT fail. Elsewhere on the glass, damage has to be larger than 40mm to constitute an MoT fail. Wiper blades must be in good condition – not perished or damaged – and clear the screen effectively. The washers must work too, and the MoT tester is within their rights to issue a fail if you haven’t topped up the washer bottle or unblocked dirty washer jets with a pin!

Keep your records in order, and take them with you. Have records available on everything you do to maintain your car — and keep them in the car if possible. Well-kept records can be instrumental in correctly diagnosing a vehicle problem the first time. Incomplete records can lead to redundant auto repairs that waste your time and money. A vehicle with a well-documented repair service history also tells your mechanic that you value first-rate work at the recommended intervals, and have done your part to keep your vehicle in tip-top shape.

Berkshire, UK? During a service the technician will carry out a health check of your vehicle, which will include checking the condition of the brakes, suspension, tyres and other crucial parts. That will ensure they are in working order, identify any potential problems and allow the technician to recommend how to fix problems before they get too serious. Finally, it’s also the perfect opportunity to mention any annoying issues you’ve noticed. The technician will be able to investigate and possibly fix them while the car is up on a ramp. The cost of a service depends on numerous factors, including whether you’ve booked a full or interim check-up, where you choose to have your car checked and, in some cases, where in the UK you live.

An MOT is a legal requirement after three years. Without it your insurance is invalidated, and you could be fined. There’s another important aspect to the MOT. It proves that your car is roadworthy, and safe to drive. Vehicles have a lot of stresses put upon them. As they age the chances of parts wearing or failing increase. An MOT test can help to spot problems before they occur. Call Tilehurst Service & MOT Centre today. We perform fair and thorough MOTs for all cars and motorbikes.

If your radiator builds up deposits, it can mess with the cooling system in your car. To keep the radiator in top shape, a radiator flush will do the trick. How often you need to replace the radiator fluid will depend on your vehicle. Start by consulting the owner’s manual to get an idea. For the most part, you can get away with flushing the radiator every couple of years. Now that you know about these basic car repairs, you can keep your car in top shape for many years to come. Remember to rotate your tires, change the oil, replace the brake pads, and more.

Excellent Morocco vacation destinations

Top rated Morocco vacation tour packages: If you’ve always fancied the arid desert scenes in Hollywood movies, you’ll be excited to know that some of your favorite desert classics may have passed through Morocco at some point during their filming. Morocco has been welcoming Hollywood directors since the ‘60s, and the town of Ouarzazate has been a hub of it all. If you love capturing beautiful moments in your camera lenses then this is surely one of the best places in Morocco for you! So now you know what makes this city one of the best places to visit in Morocco! With all its Arabian beauty that draw travelers from far and wide, it sure will provide you with some great backdrops for your pictures. See even more info on private transfer Marrakech to Essaouira.

Discover Morocco from the perspective of a hot air balloon. Embark on this thrilling ride above the Palm Grove of Marrakech and its surrounding landscape to see a bird’s eye view of the area. Round off your experience with a cup of fresh mint tea and visit to a local Berber house. Just one hour away from the legendary Jemaa El Fna Square, fly in a hot-air balloon over the beautiful countryside, seeing the amazing contrast between Morocco’s urban and rural areas.

The scenic Ourika Valley is popular with both locals and tourists. There are several walking routes through the valley, along the river, and in the mountains, though for many, the seven-level waterfalls are the highlight of a trip. Climbing the lower levels requires a bit of a scramble up rocks, but the track to the upper levels is less challenging. In addition to lovely views, visitors can also experience Berber life, go rafting, and take a dip in the refreshing water. Within the Middle Atlas Mountains, Ifrane is often referred to as the Switzerland of Morocco. The charming city, with its Swiss-style chalets, is a prime gateway to the nearby Ifrane National Park. Hiking opportunities through cedar forests abound, and you may spot Barbary macaques.

Todra Gorge is situated on the remote east side of the High Atlas Mountains. Both the Todra and neighboring Dades Rivers have carved out cliff-sided canyons through the mountains. The final 600 meters of the Todra Gorge are the most spectacular as the canyon narrows to a flat stony track as little as 10 meters (33 ft) wide in places with sheer and smooth rock walls up to 160 meters (525 ft) high on each side.

Kasbahs in the Draa Valley: This valley, which connects the southeastern end of the High Atlas with the desert beyond, is prime territory for architecture and history fans. All the way to the town of Zagora, the road is rimmed by palm tree oases and scattered with beautifully preserved kasbahs made from mudbrick, which are fascinating to explore. It’s a great place for a road trip, stopping off at villages along the way to admire the view and delve into the shady, dimly lit passages of the kasbahs. In particular check out Kasbah des Caids in Tamnougalt, which has been used as a location in plenty of Hollywood films, and Timidarte village, where the village’s kasbah architecture has been finely restored.

This huge garden, once a royal retreat, is a bubble of serenity hidden right in the heart of Marrakesh. It’s a favorite spot for locals who want to escape the hustle and enjoy some peace and quiet. The majority of the area is taken up with olive groves, but for visitors, the main attraction and reason to come here is the large reflective pool with its fine pavilion. Built in the late 19th century, the pool and pavilion are a favored spot for many local Marrakesh families, who come here to picnic and stroll. There are excellent photo opportunities here of the pool with the Atlas Mountain Range reflected in its water, on a clear day.

On arrival in Marrakech you will be met at Menara airport and transferred to Riad Africa, your accommodation in the heart of Marrakech medina. With palaces and palm groves, rose gardens, and a backdrop of the snow-capped peaks of the High Atlas Mountains, Marrakech is the capital of the Moroccan South, a cultural crossroads and keeper of tradition and folklore. After time to settle in the famous souks of Marrakech offer an intoxicating passage to Africa’s most famous meeting place – the huge medieval square of Place Djemaa el Fna. Tonight a tasty home-cooked Moroccan dinner can be enjoyed in Riad Africa’s roof terrace restaurant.

We have created a number of travel packages that vary based on your desire, length of stay, and affordability. You can personalize any of the packages to match your specific needs. Regardless of your traveling style, be it as a group, with your family, while on your honeymoon, or by yourself, you will be able to explore the entire country in just a short amount of time and with best Morocco tour company. With the chance to explore the local families’ houses, hike in the highlands, trek in the desert, and take a rest in beach resorts. Our journeys provide an enriching local cultural Tourism in Morocco. Our primary objective is to offer you a unique and original adventure that will present you with a superior, luxurious experience. Find even more details at bucketlist.ma.

Progenex Untold – The Inside Story by its Founder in a Three-Part Tell-All Expose

Untold – The Inside Story by its Founder in a Three-Part Tell-All Expose

Adam Zuckerman, founder of Progenex – an international sports nutrition company, emerges from the shadows after 10-years to tell the true accounts of great invention, criminal fraud, and what he intends to do about.

In 2009, Adam Zuckerman, an American finance entrepreneur partnered with Dr. Scott Connelly, famed inventor of MET-Rx, an American brand of nutritional supplements Connelly sold to Rexall Sundown for $108 million in 2000, currently owned by NBTY.

After 9-years of retirement, Connelly wanted back in the game and launched Progenex Dairy Bioactives, Inc., a bio-nutritional/medical start-up, consisting of a patented and proprietary product Connelly named “Recovery.”

Recovery, as its name implies, was a consumable whey-protein hydrolysate Connelly co-developed with largest dairy producer in Australia, Murray Goulburn Co-Operative Co. Limited (MGC), acquired in 2017 by Saputo (TSX:SAP) for $1.2B. MGC and Connelly co-created a unique substance called Whey Growth Factor Extract (WGFE), which was discovered by tracking RNA expression signatures to reveal which genes were involved with muscle growth, metabolism, and inflammatory response. The product was noticeably effective and it was pricey because it was costly to make. As part of Connelly’s agreement to co-develop WGFE, MGC granted Connelly an exclusive license to market WGFE in the United States, provided he could meet minimum production thresholds for raw materials. Connelly needed a business partner and capital.

Prior to founding Progenex Dairy Bioactives, Inc. with Zuckerman, Dr. Connelly began his career as an anesthesiologist.

Dr. Connelly worked in the hospitals burn unit, which is where he discovered that healing from wasting or damage to human tissue was to occur from the inside out not topically. Simply, while the medical and pharmaceutical world raced to create a topical solution for tissue regeneration, Connelly created a digestible consumable that would not only prove to regenerate tissue in burn victims and slow wasting, but in anyone who needed fast repair and recovery. These findings led to the creation of Progenex “Recovery” – the company’s marquis product, but not before Connelly made his bones a decade earlier, where many sports-fitness enthusiasts consider Scott Connelly the Godfather of industry.

MET-Rx is best known for pioneering a new category of bodybuilding supplements known as meal replacement powders or MRPs.

It was also involved in the androstenedione controversy in the late 1990s. As noted above, the original MET-Rx product was intended to help prevent critically ill patients from losing muscle mass. Connelly’s product was marketed in cooperation with Bill Phillips and the two began marketing to the bodybuilding and athletic communities, launching sales from the low hundreds of thousands to over $100 million annually.

Connelly sold all interest in the company to Rexall Sundown for $108 million in 2000. MET-Rx is currently owned by NBTY

Connelly’s intended application for MET-Rx was the medical sector, as with Progenex to follow, where MET-Rx fast became the gold standard for the bodybuilding community worldwide for obvious reasons in the 80’s – lifting weights is a process of repeatedly tearing tissue and requiring fast repair. And Connelly wasn’t shy about being the poster boy for his brand, nor did he pose in a lab coat. Quite the contrary, where beyond his exhaustive credentials as a protein science pioneer and MD, who revolutionized an industry, Connelly was ripped and often posed with dumbbells in his hands and a tank top for advertisements and interviews.

Enter CrossFit. Progenex gains significant momentum as the title sponsor for CrossFit and becomes a national brand.

Greg Glassman, founder of CrossFit, met with Zuckerman and Connelly in 2011 to strike a deal with Progenex as title sponsor for the CrossFit Games. CrossFit was just becoming a household name, which attracted Reebok in 2014, squeezing Progenex out.

CrossFit, a branded fitness regimen that involves constantly varied functional movements performed at high intensity. The method was developed by Greg Glassman, who founded CrossFit with Lauren Jenai
in 2000, with CrossFit its registered trademark. The company forms what has been described as the biggest fitness chain in the world, with around 12,000 affiliated gyms in over 150 countries as of 2022,
under half of which are located in the United States.

CrossFit, meaning cross-discipline fitness, was conceived as a company in 1996 as Cross-Fit. Greg Glassman and Lauren Jenai incorporated CrossFit, Inc. in 2000. They opened a gym in Santa Cruz, California in 2001 and posted their workouts on the Internet for their clients, and these workouts were then quickly adopted by individuals in the police, military, firefighting services. The first affiliated gym (known as ‘box’) to form was CrossFit North in Seattle, Washington when Glassman’s internet postings were used by those who wanted to officially incorporate his workouts into their training regimen in 2002.

Glassman obtained complete control over the company in 2012 after a divorce with Jenai, who tried to sell her share in the company to an outside party after the divorce settlement, but Glassman bought it with a $16 million loan from Summit Partners. In June 27, 2020, CrossFit sold to Eric Roza, a tech entrepreneur who made his name and fortune with a data company he sold to Oracle for $1.2 billion in 2014. Roza, 53, according to one source, paid $200 million buying CrossFit Inc.

Connelly and Zuckerman go to war over Progenex before the ink even dries.

In May of 2010, Zuckerman brought suit against Connelly for breach of contract. Both said to have egos as large as the Grand Canyon, Zuckerman emerged victorious in 2013 after a three-year legal blood bath, winning all of Connelly’s shares for $1 dollar. But this is merely where the story begins. Progenex had become an industry leader and was about to go international, but Zuckerman had other issues looming.

Zuckerman was released from prison in late 2013 after beating trumped-up charges by the government, which led to a decade of secretive activities that to this day remain sealed by the Feds. It is believed that his 7-year relationship with the government prior to founding Progenex, not only assured Zuckerman’s early release but would make his government enemies into allies and Zuckerman forever untouchable.

After just 14-months, on October 14, 2013, Zuckerman was released from Terminal Island Federal Correctional Institution, expecting to retake control of the Progenex empire he had won from Connelly. But his chief underling, Ryan Page, who would be later sued by CrossFit for trademark infringement, along with Steve Shamion, a trusted investor Zuckerman appointed as temporary Manager to protect his assets had other plans. Shamion and Page saw dollar signs, and instead elected to conspire to steal Progenex from Zuckerman and his ex-wife, Patricia Robinson, who Zuckerman gave full control of Progenex through its managing entity, Amidah LLC, and 40 investors. (See related court transcripts).

Zuckerman met Page four years prior to founding Progenex, rescuing him from a company he ran into the ground in Las Vegas with Luke Adams, who currently serves as Progenex’ dirty CFO.

Zuckerman refers jokingly to Page as the M&M pirate – a tongue-in- cheek descriptor of Page, who would eat an entire large bag of peanut M&M’s in every meeting, and hides his identity as Progenex’ puppet master. Page is hidden from sight by design, and not merely to avoid a head on collision with the legal freight trains coming for him.

Page is anything but a poster boy for a global sports-nutrition brand that caters to an elite athletic market. He not only lacks expertise in the field or requisite credentials to develop these products, but bears no physical resemblance to the exclusive athletes the products cater to. Page is a fraud in every way, and continues to thwart authorities and the courts, after being found culpable for defrauding over 40 investors, pilfering Progenex corporate assets, and failing to turn over the company to investors and Patricia Robinson. Page, along with his entire family, Luke Adam’s, and Paul Gomez, Zuckerman’s ex brother-in-law, are all alleged to be co-conspirators, helping Page to scatter Progenex assets around the world in a hide and seek game of catch me if you can.

Page not only illegally controls Progenex, but has his hands in every pot, using sub-entities he owns and controls as the company’s vendors. From manufacturing to shipping and co-packing, Page created a tangled web used to fleece the company and its investors in every way, including changing the long-established website address from www.progenexusa.com to www.progenexfit.com, to the avoid seizure of Progenex assets ordered by the courts.

Paul Gomez, who started as a warehouse boy for Billabong, a global surf brand, under then CEO Bob Hurley, founder of Hurley International, sold to Nike, apparently contributed nothing more than t-shirts to the supplement maker, and serves as a pin up patsy for Page. Zuckerman describes Gomez as an “illiterate parasite that betrayed his entire family,” along with wife Stephanie, Patricia Robinson’s sister. Robinson remains to this day the rightful heir to the Progenex throne, where Zuckerman put the controlling entity, Amidah LLC in her name for safekeeping prior to serving his prison term.

Page viciously targeted Robinson after Zuckerman let the legal wolves loose on Page, blackmailing her to backdate documents that would disavow her control and rights to Progenex. When Robinson refused, Page illegally ceased paying her distributions from the company, along with the rest of the Progenex investors. Not a single investor has received a dollar in profit or return on their investment to date, while Page lines his pockets and continues to deceive and defraud Progenex customers.

To say that Zuckerman has been lurking in the shadows all this time related exclusively to the Progenex saga would be inaccurate. Zuckerman has been anything but inactive.

Zuckerman knew he needed to be patient. After Zuckerman’s release in 2013 as noted above, Page and Shamion, along with Dwight Beckstrand, Progenex’ now disgraced former corporate counsel, who faced domestic violence charges, instead of returning Progenex to Zuckerman as agreed, conspired to destabilize and oust Zuckerman.

Page began plucking off, one by one, Zuckerman’s internal founding team at Progenex while he was serving time. In a Lord of The Flies-esque corporate kill off, Aaron Thomas, who raised most of the early startup capital for Progenex from over 40 close investors and family, was the first to go. Then came Cameron Verdi, a close friend Zuckerman salvaged from the loan modification business, who would later attempt his own coup by high jacking Amidah from Zuckerman’s ex-wife Patricia Robinson with no legal authority.

Cameron Verdi, who imposters as a founder was nothing more than a mid-level employee who Zuckerman appointed as a Wooden Indian to manage Amidah LLC under his direction.

Zuckerman is well known for making outrageous public commentary without restraint. When asked, Zuckerman explains that he simply says out loud what everyone else thinks. Zuckerman describes Verdi as a “nobody opportunist, dumber than his dog,” which is a bold statement considering Zuckerman’s love of animals.

Per Zuckerman and according to filed corporate documents, Verdi lacks any legal authority as a decision maker for Amidah LLC, the controlling entity and largest shareholder of Progenex. Verdi simply vexatiously interfered and bungled efforts to retake control of Progenex from Page. Patricia Robinson, Zuckerman’s ex-wife is the managing member of Amidah, owning 90%, and more than 45% of Progenex in the aggregate. Robinson remains in legal control of Amidah and therefore Progenex.

Any significant actions on behalf of Amidah must be authorized by Robinson, including but not limited to, bringing and settling litigation. But Verdi, per Zuckerman is “an unscrupulous troglodyte, who took advantage of Robinson’s lack of sophistication and turned on his master, Zuckerman.” And worse, Thomas Frost, the San Diego lawyer retained by Zuckerman to take the case, allowed it, and refused to talk to his actual client, Patricia Robinson.

Not only did Frost fail miserably in court using Zuckerman’s airtight roadmap and evidentiary file of over 2000 organized documents, but allowed Verdi to subvert Robinson, who is his true client, causing a four-
year stall to retake Progenex from Page. Zuckerman indicates that Frost should have been sued for malpractice and disbarred. And so should Judge Margret Nagle, according to Zuckerman, who had been stymied for 4 years in finalizing her ruling for these very reasons. Zuckerman remains emphatic that Judge Nagle failed to do her job. According to court transcripts and per Zuckerman, Judge Nagle was as well dumfounded related to how Frost was able to proceed without Robinson’s authority. In fact, Judge Nagle asked that Zuckerman testify to these facts as part of a recorded testinomy soon to be published.

Progenex is no longer the patented formula Dr. Connelly invented. Page uses Glanbia Nutritional’s patented whey-hydrolysate, Thermax 690, in both More Muscle and Recovery, the company’s marquis products.

The Connelly/Zuckerman war suffered many casualties, among them MGC and with it WGFE – the secret sauce that made Recovery and More Muscle unique. MGC severed ties with Connelly after Zuckerman won the company back. The formula is not sold by anyone in the US currently, but Zuckerman plans to change that. Connelly and MGC had published significant science behind WGFE’s efficacy, while Page buried independent lab reports that prove Progenex products lack of efficacy, and are nothing more than overpriced cheap whey, along with label fraud claims. Zuckerman claims Progenex is a fraud, and anyone can buy Thermax 690 from Glanbia or competitive alternatives that are superior hydrolysates, and Zuckerman intends to make sure they do.

Zuckerman doesn’t want Progenex, just its customers. Making deals with Progenex competitors, he plans to introduce WGFE 2.0 to millions of Progenex customers who will fast jump ship as the truth comes out.

Armed again with deep pockets and a dream team of high-powered lawyers, Zuckerman has no intention of picking up where Progenex and the lawyers failed. Zuckerman has other plans, and intends to disclose the brands fraud, along with Page, and migrate millions of customers to a recognized industry leader and announce a its full suite of WGFE 2.0 alterative product for less. (Soon to announced)

Zuckerman had his plan, and knew timing was key. Waiting patiently for the statute of limitations to run out for the government, who had been hunting his war chest for a decade, Zuckerman has quietly amassed a new army while reclaiming his resources to strike.

In a 3-part live streaming interview, conducted by high-level CrossFit influencers, and redirected back to www.progenexuntold.com, Zuckerman will tell the entire story from start to finish to what is expected to be a significant audience. But it doesn’t end there.

Zuckerman wants the customers to know the truth about Progenex and Page, and understand that they are being ripped-off, lied to, and are lining the pockets of a thief, Page – who not only betrayed the market, but has harmed innocent people and their families. Zuckerman believes that customers will be outraged and abandon the brand for new options – a safe landing where Zuckerman holds equity and can repay investors. Zuckerman’s team of internet mercenaries are prepped to get the word out via Twitter, Instagram, email, Google, and even to cell phones of customers directly.

Stay Tuned for Part II of Untold : Zuckerman’s live streaming interview dates, surprise guest host, and the launch of www.Progenexuntold.com.